Product Highlights
- Three-level vibration-isolation design helps reduce floor and ambient vibrations, supporting more stable and repeatable weighing.
- Full-size 900 × 600 × 80 mm natural marble slab with surface roughness up to grade 0 provides a dense, dead-flat, and highly rigid weighing surface that resists deflection.
- Welded galvanized steel frame built from 1.0 mm galvanized sheet reinforced with 60 × 40 × 1.5 mm galvanized steel tube, giving an overall structural thickness of 2.5 mm for solid, long-lasting stability.
- Akzonobel powder-coated finish protects the steel body against corrosion and everyday laboratory wear.
- TPU (polyurethane) damping paired with hydraulic shock absorption absorbs impact and dampens residual movement to keep the marble platform steady.
- Taiwan-made 8-ton jack supports the heavy marble slab, helping maintain its stability and surface flatness over time.
- Heavy-duty anti-rust adjustable feet with a 60 mm chassis and 12 mm connecting rod allow easy leveling on uneven laboratory floors, each fitted with a TPU shock-proof chassis.
- Substantial ~175 kg total weight adds mass and rigidity, which helps the table absorb vibration and stay firmly planted in place.
Technical Specifications
| Item | Specification |
|---|---|
| Model | JH-BT002 |
| Overall Size | 900 × 600 × 850/900 mm |
| Marble Slab Size | 900 × 600 × 80 mm |
| Marble Surface Roughness | Up to grade 0 |
| Frame Material | Galvanized steel, Akzonobel powder-coated |
| Frame Construction | 1.0 mm galvanized sheet + 60 × 40 × 1.5 mm galvanized tube, welded as one body |
| Structural Thickness | 2.5 mm |
| Vibration Isolation | Three-level isolation design |
| Damping System | TPU damping + hydraulic shock absorption |
| Load Support | Taiwan jack, ~8-ton capacity |
| Adjustable Feet | Anti-rust heavy-duty, 60 mm chassis, 12 mm rod, TPU chassis |
| Steel Body Weight | Approx. 40 kg |
| Marble Slab Weight | Approx. 120 kg |
| Total Weight | Approx. 175 kg |
| Damping Effect 1 | N/A |
| Damping Effect 2 | Approx. 50% under tested conditions |
| Suitable For | Analytical, semi-micro, and micro balances |
Vibration reduction results may vary depending on floor conditions, balance type, and the surrounding environment.
Packaging and Shipping
We pack the JH-BT002 carefully to protect it during long-distance transport:
- Full container load (FCL): The table body and marble slab are packed separately to keep both parts safe in transit.
- Less-than-container load (LCL): Reinforced honeycomb cartons protect the table from damage during international shipping.
Request a Quote
Looking for a rugged, high-mass platform for your precision balances? Contact us today for pricing, lead times, and full technical details on the JH-BT002 anti-vibration balance table.
Frequently Asked Questions
Q: What types of balances is the JH-BT002 suitable for?
A: The JH-BT002 is built for analytical, semi-micro, and micro balances. Its heavy 80 mm marble slab and three-level vibration isolation give precision instruments a steady, low-vibration surface for accurate readings. If you weigh at the hundred-thousandth- or one-millionth-level, this table is a strong fit.
Q: How does the vibration isolation actually work?
A: The table uses three combined layers to keep your balance steady. A full-size natural marble slab adds mass and rigidity to resist movement. TPU (polyurethane) damping then absorbs impact, while a hydraulic shock absorber dampens any residual vibration. Together, they help limit vibration from the floor and surroundings.
Q: What does the 50% damping figure mean?
A: It means the table can reduce vibration by approximately 50% under the tested conditions. Actual results depend on your floor, balance type, and surrounding environment. If you’re unsure what to expect, share details about your lab setup, and we’ll help you estimate the performance for your space before you order.
Q: What are the marble slab specifications?
A: The JH-BT002 uses a full-size natural marble slab measuring 900 × 600 × 80 mm with surface roughness up to grade 0. This dense, dead-flat surface resists deflection and holds its position over time. A Taiwan-made 8-ton jack supports the slab, maintaining its stability and surface flatness during use.
Q: What are the dimensions and total weight of the JH-BT002?
A: The overall size is 900 × 600 × 850/900 mm, and the complete table weighs about 175 kg. The steel body accounts for roughly 40 kg, with the marble slab adding around 120 kg. This substantial mass adds rigidity, helping the table absorb vibration and stay firmly in place.
Q: Can the table be customized for our lab?
A: Yes. As a manufacturer, we can adjust dimensions, marble slab size, and finish to match your requirements. Just share your balance model and workspace details, and we’ll recommend the best configuration for your needs.
Q: How is the table packed for international shipping?
A: We pack the JH-BT002 to protect it during long-distance transport. For full container loads (FCL), the table body and marble slab are packed separately for added safety. For less-than-container-load (LCL) shipments, we use reinforced honeycomb cartons to reduce the risk of damage in transit.
Q: How do I request a quote or place an order?
A: Send us your required quantity, destination country, and any customization details. We’ll reply with pricing, lead times, and full technical information. Reach out via our contact form or email, and our team will guide you from there.
