Key Features
- Compact drain point — The smallest sink in our PP range, sized to provide a rinse-and-drain point without crowding the worktop.
- Built for fume hoods and benches — Its small footprint fits neatly into fume hood interiors and onto standard lab benches.
- Good chemical resistance — High-grade PP handles many common laboratory reagents. Because performance depends on the chemical concentration and contact time, confirm suitability for your application.
- Flat, distortion-free construction — A maximum edge thickness of 7 mm helps the basin stay flat and hold its shape through repeated use.
- Scratch-resistant matt lip finish — The matt finish on the lip resists scratches and matches the look of most lab worktops for a consistent bench appearance.
- Complete accessory set — Ships with high-grade PP overflow, stopper, and filter/PP basket trap as standard, so the unit is ready to install on arrival.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | JH-PS005 |
| Product | PP Cup Sink |
| Material | High-grade polypropylene (PP) |
| Exterior Size | 260 × 140 × 180 mm |
| Max Edge Thickness | 7 mm |
| Finish | Matt finish on lip, scratch-resistant |
| Chemical Resistance | Resistant to most chemicals, including aqua regia |
| Accessories Included | PP overflow, stopper, filter / PP basket trap |
Available PP Sink Size Range
The JH-PS005 sits at the smallest, most compact end of our full PP range. It works best as a local drain point rather than a wash-up basin. If you need a larger basin, the table below helps you select a better-matched model.
| No. | Model | Product Name | Size (L × W × H) mm |
|---|---|---|---|
| 1 | JH-PS001 | PP Big Sink | 800 × 450 × 310 |
| 2 | JH-PS002 | PP Medium Sink | 550 × 450 × 310 |
| 3 | JH-PS003 | PP Small Sink A | 440 × 340 × 280 |
| 4 | JH-PS004 | PP Small Sink B | 440 × 340 × 180 |
| 5 | JH-PS005 | PP Cup Sink | 260 × 140 × 180 |
Sizing guidance for the JH-PS005:
- Choose the JH-PS005 when you need a compact drain point on a fume hood worktop or standard bench.
- For a deeper small basin, step up to the JH-PS004 or JH-PS003 (Small Sink A).
- For genuine wash-up capacity, choose the JH-PS002 medium sink or the JH-PS001 big sink.
Share your bench or fume hood layout, and we’ll confirm the right model for your project.
Applications
The JH-PS005 is designed for compact, point-of-use drainage where working space is limited:
- Fume hoods — The small footprint fits neatly inside fume hood worktops, providing staff with a chemical-resistant drain point for corrosive procedures without occupying the work area.
- Laboratory worktops — Installed on standard benches and typically paired with a low-level single-outlet faucet, they provide a localized rinse point close to the task.
- School and university labs — A durable, compact basin for teaching benches where space is tight, and a small drain point covers everyday needs.
- Auxiliary rinse stations — practical secondary drain points alongside a larger main sink.
Fume Hood Integration
The cup sink is especially well-suited to fume hood worktops, where surface space is limited and wash-up functions need to stay close to the work:
- Fits inside standard fume hood worktops without crowding the working area.
- Provides a localized rinse-and-drain point during chemical procedures.
- Pairs with a low-level, single-outlet lab faucet for point-of-use rinsing.
- Keeps drainage close to the task, reducing the need to carry reagents across the bench.
Share your fume hood worktop layout and faucet position, and we’ll confirm the cutout details for a clean fit.
Installation Options
Thanks to its lightweight, the JH-PS005 supports two mounting methods:
- On-worktop (drop-in): The sink sits on top of the bench surface for straightforward installation. This is the most common setup for cup sinks on fume hood worktops and lab benches.
- Under-worktop (undermount): The sink mounts beneath the worktop for a clean, flush finish.
For a leak-free result, keep the worktop surface level and properly seal the joint between the sink and tabletop. A confirmed cutout size and faucet position help ensure a precise fit. Choose the method that best matches your bench design and plumbing layout.
PP Cup Sink in Fume Hood:
Customization Options
We manufacture PP laboratory sinks to fit your project requirements:
- Size selection across the full JH-PS001 to JH-PS005 range
- Cutout position to match your fume hood worktop or bench layout
- Faucet pairing for point-of-use rinsing with a low-level single-outlet faucet
- Drainage configuration to match your plumbing layout
- On-worktop or under-worktop installation to suit your bench
- Matching accessories, including overflow, stopper, and basket trap
Production Facilities:
Request a Quote
Planning a laboratory fit-out or replacing existing basins? Send us your required models, sizes, quantities, and installation details, and our team will prepare a tailored quotation. For larger projects, share your bench or fume hood layout so we can confirm the full scope and lead time.
FAQ
What is the JH-PS005 cup sink used for?
The JH-PS005 is a compact drain point, not a wash-up basin. It provides a localized rinse-and-drain point on fume hood worktops and standard lab benches, typically paired with a low-level single-outlet faucet, so staff can rinse directly at the work area.
What size is the JH-PS005?
The exterior measures 260 × 140 × 180 mm (L × W × H). This is the smallest model in our PP sink range, so it fits neatly onto fume hood worktops and benches without crowding the workspace.
Is it suitable for fume hoods?
Yes. The compact footprint is designed to fit within fume hood worktops, providing staff with a chemical-resistant drain point during corrosive procedures without occupying valuable working space.
What chemicals can the cup sink handle?
High-grade PP offers good resistance to many common laboratory reagents. Because performance depends on the specific chemical, concentration, and contact time, confirm suitability for your application. Send us your main reagents, and we’ll advise on compatibility.
What faucet is usually paired with the cup sink?
The JH-PS005 is most often paired with a low-level, single-outlet lab faucet placed on the same worktop. This setup gives staff a practical rinse-and-drain point right where the work happens.
What accessories are included?
Each cup sink ships with a complete set of high-grade PP accessories: overflow, stopper, and filter/PP basket trap. These come as standard, so the unit is ready to install on arrival.
How do I request a quote?
Send us your fume hood or bench layout, cutout position, faucet requirements, drainage needs, and quantity. A drawing helps us confirm the fit and quickly prepare accurate pricing.
