High Grade PP Single Faced Drip Rack & Pegboard | Model JH-PB002

Key Benefits

• Ready to use out of the box — Includes 50 detachable PP pegs as standard, so the rack handles a busy wash-up station from day one.
• Space-saving single-faced design — Mounts against a wall or panel to free up valuable bench area beside the sink.
• Reliable chemical resistance — High-grade PP withstands routine wash-up runoff without corroding or degrading.
• Fits your everyday glassware — Pegs sized for beakers, long test tubes, and small test tubes cover common lab items.
• Clean, controlled drainage — A tray drainage hole routes runoff away, preventing water from pooling on the bench.
• Easy to reconfigure and clean — Detachable pegs adjust in minutes and lift out for a deeper clean.

Features

High-Grade PP Construction

The JH-PB002 is molded from high-grade polypropylene, chosen for good chemical resistance and durability. It offers good resistance to many common lab acids, alkalis, and cleaning agents, so it holds up to daily glassware drying without corroding — confirm suitability for specialized or unusually aggressive reagents. The result is a dependable, low-maintenance fixture for demanding wash-up areas.

50 Detachable PP Pegs Included

Each unit ships with 50 PP pegs as standard, sized to hold beakers, long test tubes, and small test tubes securely as they drain. Because the full set comes included, the rack is ready to equip a busy wash-up station straight away, with no separate parts to order. Need a different peg count? Let us know, and we’ll confirm what’s available.

Detachable Pegs for Fast Reconfiguration

The pegs attach and detach easily, so you can rearrange the board in minutes to suit your glassware mix. This keeps the drying area organized and makes deep cleaning simple — just remove the pegs, clean, and refit.

Tray Drainage Hole

A drainage hole in the tray channels runoff from drying glassware away cleanly. That stops water from pooling on the tray or bench, keeps the drying station tidy, and makes daily cleanup easier.

Flexible Installation

The JH-PB002 supports both panel-mounted and deck-mounted installation. Fix it to a wall panel to save bench space, or mount it to the deck (worktop) where a freestanding drying point works better. Choose the method that best matches your bench design and available space.

Technical Specifications

Overall dimensions, tray size, and peg spacing can be confirmed for your project. Share your bench layout and required capacity, and we’ll advise on exact details before you order.

Who It’s For / Best Use Cases

The JH-PB002 suits any lab that washes and reuses glassware daily, especially where a compact, wall-side drying point matters:

• Sink-side drying stations — Mount above or beside the wash-up sink to drain beakers and test tubes without taking up bench space.
• Teaching labs — Handle frequent wash-and-reuse cycles across busy class sessions, keeping cleaned glassware staged and within reach.
• QC and testing labs — Provide a chemical-resistant drying point where glassware is constantly turned over.
• Research labs with limited bench space — Free up the worktop by moving drying onto a wall panel.

Its primary role is air-drying and short-term staging of freshly washed glassware, keeping the surrounding worktop clear and hygienic.

What’s Included

• 1 × JH-PB002 single-faced PP pegboard with tray
• 50 × detachable PP pegs (for beakers, long test tubes, and small test tubes)
• Panel-mounted or deck-mounted installation fittings, per your chosen setup

FAQs

Is the JH-PB002 single-faced or double-faced?

The JH-PB002 is a single-faced model — pegs sit on one side, and it mounts against a wall or panel to save bench space. If you need two-sided drying for open or island benches, a double-faced pegboard is available as a separate option. Tell us your bench type, and we’ll point you to the right model.

How many pegs are included, and what glassware do they fit?

Each JH-PB002 ships with 50 detachable PP pegs as standard, sized to hold beakers, long test tubes, and small test tubes. The full set comes included, so the rack is ready for a busy wash-up station out of the box, with no extra parts to source.

What chemicals are it suitable for?

High-grade PP offers good resistance to many common lab acids, alkalis, and cleaning agents encountered during routine wash-up. For specialized or unusually aggressive reagents, send us the details, and we’ll confirm suitability for your application.

What’s the difference between panel-mounted and deck-mounted installation?

Panel-mounted fixes the rack to a wall panel, freeing up bench space. Deck-mounted fixes it to the worktop, which works well where wall mounting isn’t practical. Both are supported, so you can match the method to your bench design.

What does the tray drainage hole do?

It channels water away as glassware dries, so runoff doesn’t pool on the tray or bench. This keeps the drying station tidy and makes daily cleanup simpler.

What colors are available?

The JH-PB002 comes in black, white, and gray. Choose the shade that best matches your worktop and lab design, and let us know your preference when you request a quote.

How do I clean and maintain it?

Wipe the pegboard and tray regularly with a mild detergent and a soft cloth, then rinse with water. Detach the pegs for a deeper clean, and clear the drainage hole periodically to keep water flowing freely.

Request a Quote

Choose the JH-PB002 if you need a ready-to-use, space-saving drying rack for beakers and test tubes beside your wash-up sink. Send us your installation method (panel- or deck-mounted), color choice, and required quantities, and our team will prepare a tailored quotation. For larger projects, share your full bench and wash-up layout so we can confirm configuration, mounting, drainage, scope, and lead time.