Single Outlet Hot-Cold Laboratory Mixer Faucet | Model JH-WL018

Why Deck-Mounted?

The deck-mounted build is the reason to choose the JH-WL018 over a wall-mounted or free-standing tap:

• Stable, fixed fit — Bolts straight to the benchtop or sink deck, so it stays put through heavy, repeated daily use without working loose.
• Suits pre-drilled sink decks — Drops into a standard deck hole, making it a clean fit for benches and sinks already prepared for a deck-mounted faucet.
• No wall mounting needed — Ideal where there’s no wall behind the sink, or where you’d rather keep plumbing under the bench.
• Tidy single-outlet layout — One spout keeps the deck clear and easy to work around at shared wash points.

If your sink or bench is set up for a deck-mounted tap and you need a stable, fixed hot-cold point, the JH-WL018 is the practical choice.

Technical Specifications

Deck hole size, hot/cold inlet connection sizes, spout height and reach, and clearance can be confirmed for your project. Share your sink and bench layout, and we’ll advise on the exact fit before you order.

Key Features

1. Deck-Mounted, Single-Outlet Hot-Cold Mixing

The JH-WL018 attaches to the bench or sink deck and delivers both hot and cold water through a single spout. You blend the two supplies with the knob switch to set the temperature and flow to the task’s needs. The fixed deck mount keeps the faucet firmly anchored, while the single outlet keeps the deck clear.

2. Solid Brass Body

A rigid, corrosion-resistant brass core that resists deformation and withstands daily handling in a wet bench environment. At around 1705 g, the weight reflects genuine solid brass construction built for long service.

3. Glossy Epoxy Powder-Coated Exterior

A protective finish that helps the outer body resist routine acid/alkali splash, UV fading, and heat in general lab conditions, keeping the surface clean over time.

4. Ceramic Headwork

Precision ceramic headwork tested to 500,000 cycles and rated to a maximum static pressure of 35 bar, for smooth, leak-free control and a long working life with fewer seal replacements.

5. Detachable Serrated Nozzle with Optional Splash Bubbler

The serrated nozzle connects to hoses or tubing and lifts out for easy cleaning. An optional splash bubbler helps control splatter at the bench — let us know if you need it added to your order.

6. Ergonomic High-Grade PP Knob Switch

Shaped for a comfortable grip and steady one-handed control of hot-cold mixing, including with wet or gloved hands.

WL018 vs WL005 / WL012 / WL004 — Which Should You Choose?

All four are hot-and-cold laboratory faucets that supply both temperatures from a single sink. The choice comes down to installation type and body profile:

• JH-WL018 (deck-mounted mixer): Fixes to the bench or sink deck for a stable, permanent fit. Best where your sink deck is already drilled for a deck-mounted tap, or where wall mounting isn’t practical.
• JH-WL005 (standard upright): A straightforward upright single-outlet fixture with a detachable copper outlet. A good general-purpose pick for standard sinks with room for a taller tap.
• JH-WL012 (two-knob mixer): An upright mixer with separate hot and cold knobs and a detachable brass serrated nozzle. Suited to setups that prefer a two-knob layout.
• JH-WL004 (low-profile): A low-foot body that sits closer to the basin for better splash control and lower clearance. Best on crowded benches or where overhead room is limited.

Choose the JH-WL018 when you need a stable, deck-mounted fixture on a prepared sink or benchtop. All four need a hot and a cold supply line. If you’re unsure, tell us your sink type, deck preparation, and supply pressure, and we’ll recommend the right model.

Applications

The JH-WL018 is built for fixed wash-station utility use, where a stable, deck-mounted tap helps:

• Fixed wash stations — A firmly anchored water point for shared sinks that see heavy, repeated daily use.
• General washing — Hand washing, glassware rinsing, and routine cleanup with the temperature set to suit the task.
• Sink-side rinsing — Blend warm and cold water for quick, thorough everyday rinsing.
• Warm-water cleaning — Clearing residue and deposits that warm water handles more easily than cold.

Its primary role is temperature-adjustable washing, rinsing, and cleaning at a fixed bench sink, keeping the surrounding worktop tidy during daily use.

Installation & Compatibility

The JH-WL018 is designed for deck mounting on a benchtop or sink deck. Because it’s a mixer, it needs both hot and cold supplies. For a clean, secure fit:

• Confirm that the deck hole in your bench or sink matches the faucet base and that there is enough clearance for the spout to operate freely.
• Check both inlet connections — the tap needs a hot and a cold supply line, so confirm the connection sizes match your bench plumbing without adapters.
• Confirm your water pressure sits within the headwork’s range (max static pressure 35 bar) for stable, leak-free operation.
• Allow clearance above and around the spout for glassware and containers.
• Position the spout so its reach covers the basin and flow drains cleanly into the sink.

Share your sink type, deck preparation, supply connections, and bench layout, and we’ll confirm the right mounting and connection details for your setup.

FAQ

When should I choose a deck-mounted mixer like the JH-WL018?

Choose the JH-WL018 when your sink or benchtop is set up for a deck-mounted tap, and you want a stable, fixed water point. It drops into a standard deck hole and stays firmly anchored through heavy daily use. If there’s no wall behind the sink, or you’d rather keep the plumbing under the bench, a deck-mounted mixer is the practical fit.

How does the JH-WL018 differ from the JH-WL005, JH-WL012, or JH-WL004?

All four supply hot and cold water at a single sink. The JH-WL018 is deck-mounted for a fixed benchtop fit. The JH-WL005 is a standard upright single-outlet faucet; the JH-WL012 is an upright two-knob mixer; and the JH-WL004 is a low-profile faucet for splash control and tight clearances. The main differences are installation type and body profile, not the core function.

Does it need both hot and cold supply lines?

Yes. Because it blends both temperatures, the faucet needs both hot and cold feeds at the bench. Confirm your supply connections match before ordering, and we’ll help check the fit.

Is the splash bubbler included?

The splash bubbler is an optional accessory quoted separately, not included as standard. It fits the detachable serrated nozzle to help control splatter at the bench. Let us know if you’d like it added, and we’ll include it in your quotation.

Does the serrated nozzle connect to tubing?

Yes. The detachable serrated nozzle connects to hoses or tubing for flexible use at the bench, and it lifts out for cleaning — remove it, rinse it, and refit it to keep the water path clear.

What does the epoxy coating protect against?

The glossy epoxy coating protects the faucet’s exterior, helping it resist routine acid and alkali splashes, UV fading, and heat under general lab conditions. It’s an external protective finish — for specific or aggressive chemical exposure, send us the details, and we’ll confirm suitability.

What is the max pressure rating?

The ceramic headwork is tested to 500,000 cycles and rated to a maximum static pressure of 35 bar. Keeping supply pressure within that range gives smooth, leak-free control and a long working life. If you’re unsure of your line pressure, tell us, and we’ll advise.

What should I confirm before ordering?

Confirm four things: your deck hole size, your hot and cold inlet connection sizes, your water pressure, and whether you need the optional splash bubbler. Checking these in advance helps ensure a secure, leak-free fit. Share your setup, and we’ll confirm compatibility.

How do I request a quote?

Send us your required quantities, deck preparation, and hot/cold inlet connection details, and note if you want the optional splash bubbler. For a larger fit-out, share your bench and sink layout so we can confirm scope and lead time.

Request a Quote

Fitting out a new lab or upgrading a prepared sink deck to a stable hot-cold mixer? Send us your required quantities, deck hole preparation, and hot/cold inlet connection details, and our team will prepare a tailored quotation for your JH-WL018 faucets. Let us know if you need the optional splash bubbler included. For larger projects, share your full bench and sink layout so we can confirm configuration, scope, and lead time. If you’d like to compare installation types, ask us about the upright JH-WL005, the two-knob mixer JH-WL012, and the low-profile JH-WL004, and we’ll help match the right faucet to your project.