Key Features
- Hot and cold through one outlet — Adjustable temperature and flow from a single, space-saving fixture, so one tap covers both warm- and cold-water tasks.
- Thickened solid brass body — A rigid, corrosion-resistant core that withstands daily handling and long-term service in a wet bench environment.
- High-gloss epoxy powder-coated exterior — A protective finish that helps the outer body resist routine acid/alkali splash, UV fading, and heat in general lab conditions.
- 90° turn ceramic headwork — Tested to 500,000 cycles and rated to 35 bar maximum static pressure for smooth, leak-free control.
- 360° swivel gooseneck spout — Rotates fully to direct flow across the whole basin, making it easy to rinse glassware and fill containers.
- Detachable copper outlet — Lifts out for easy cleaning and connects to a splash-proof water filter to reduce splatter at the bench.
Technical Specifications
| Specification | Detail |
|---|---|
| Model | JH-WL005 |
| Product | Hot-Cold Single Water Laboratory Faucet |
| Water Type | Hot and cold, single outlet |
| Body Material | Thickened solid brass |
| Exterior finish | High-gloss epoxy powder coating |
| Headwork | 90° turn ceramic; tested to 500,000 cycles |
| Max Static Pressure | 35 Bar |
| Spout | 360° swivel gooseneck |
| Water Outlet | Detachable copper; connects to splash-proof water filter |
| Mounting | Bench/deck-mounted |
| Exterior resistance | Epoxy coating resists routine acid/alkali splash, UV, and heat; confirm compatibility for specific chemicals |
Inlet connection sizes, spout height and reach, and mounting hole dimensions can be confirmed for your project. Share your sink and bench layout, and we’ll advise on the exact fit before you order.
JH-WL005 vs JH-WL012 — Which Should You Choose?
Both are hot-and-cold laboratory faucets that mix warm and cold water at a single outlet. They share the same core purpose — temperature-adjustable washing and rinsing at the bench — so the choice usually comes down to body style, installation preference, and project standards.
- JH-WL005: A hot-cold single-outlet faucet with a detachable copper outlet and a 35-bar-rated ceramic cartridge. A straightforward upright fixture for standard lab sinks that require both temperatures at a single point.
- JH-WL012: A hot-cold mixer with two-knob control and a detachable brass serrated nozzle, rated to 10 bar static pressure. A good fit for a two-knob mixer layout.
Both need hot and cold supply lines at the bench. If you’re unsure which body style and pressure rating suit your setup, tell us your sink type and supply pressure, and we’ll recommend the right model.
Applications
The JH-WL005 suits labs that need both hot and cold water at a single sink point:
- General washing — Hand washing, glassware rinsing, and routine cleanup with the temperature set to suit the task.
- Sink-side rinsing — The swivel spout and adjustable flow make everyday rinsing quick and thorough.
- Warm-water cleaning — Clearing residue and deposits that warm water handles more easily than cold.
- Teaching, research, and testing labs — A dependable, temperature-adjustable washing point for general wash-up areas.
Its primary role is temperature-adjustable washing, rinsing, and cleaning at the bench sink, keeping the surrounding worktop tidy during daily use.
Installation & Compatibility
The JH-WL005 is designed for bench/deck mounting at a standard lab sink. Because it supplies both temperatures, it needs a hot and a cold feed. For a clean, secure fit:
- Confirm that the mounting hole in your bench or sink matches the faucet base and that there is enough clearance for the spout to operate freely.
- Check both inlet connections — the tap needs a hot and a cold supply line, so confirm the connection sizes match your bench plumbing without adapters.
- Confirm your water pressure sits within the headwork’s range (max static pressure 35 bar) for stable, leak-free operation.
- Position the spout so its swivel range covers the basin and flow drains cleanly into the sink.
- Allow clearance above and around the gooseneck for glassware and containers.
Share your sink type, supply connections, and bench layout, and we’ll confirm the right mounting and connection details for your setup.
FAQ
How is the JH-WL005 different from the JH-WL012?
Both are hot-and-cold faucets that mix warm and cold water at a single outlet, so they perform the same core function. The JH-WL005 is a single-outlet fixture with a detachable copper outlet, rated to 35 bar static pressure. The JH-WL012 is a two-knob mixer with a detachable brass serrated nozzle, rated to 10 bar. The choice mainly comes down to body style, control layout, and your supply pressure — tell us your setup, and we’ll advise.
Is the JH-WL005 bench- or deck-mounted?
It’s bench/deck-mounted and fits most standard lab sinks and benches. Confirm your mounting hole size and inlet connections with our team, and we’ll check compatibility before you order.
Does it need both hot and cold supply lines?
Yes. Because it delivers both hot and cold water, the faucet needs a hot and a cold feed at the bench. Confirm your supply connections match before ordering, and we’ll help check the fit.
What does the epoxy coating protect against?
The high-gloss epoxy coating protects the faucet’s exterior, helping it resist routine acid and alkali splashes, UV fading, and heat under general lab conditions. It’s an external protective finish — for specific or aggressive chemical exposure, send us the details, and we’ll confirm suitability.
What is the max pressure rating?
The 90° turn ceramic headwork is tested to 500,000 cycles and rated to a maximum static pressure of 35 bar. Keeping supply pressure within that range gives smooth, leak-free control and a long working life. If you’re unsure of your line pressure, tell us, and we’ll advise.
Is the splash-proof filter included?
The detachable copper outlet connects to a splash-proof water filter that reduces splatter at the bench. Let us know if you need the filter supplied with your order, and we’ll confirm what’s included in your quotation.
What should I confirm before ordering?
Confirm three things: your sink mounting hole size, your hot and cold inlet connection sizes, and your water pressure. Checking these in advance helps ensure a secure, leak-free fit. Share your setup, and we’ll confirm compatibility.
How do I request a quote?
Send us your required quantities, mounting type, and hot/cold inlet connection details. For a larger fit-out, share your bench and sink layout so we can confirm scope and lead time.
Request a Quote
Fitting out a new lab or upgrading a sink to a temperature-adjustable hot-cold faucet? Send us your required quantities, mounting type, and hot/cold inlet connection details, and our team will prepare a tailored quotation for your JH-WL005 faucets. For larger projects, share your full bench and sink layout so we can confirm configuration, scope, and lead time. If you’d like to compare body styles, ask us about the two-knob mixer JH-WL012, and we’ll help match the right faucet to your project.
