Laboratory Faucets Built for Every Bench, Panel, and Hood
From single-outlet cold-water taps to remote-controlled fume-hood valves, Glorylab’s range of 14 lab faucet models covers every water-supply need across research, education, healthcare, and industrial laboratory environments. Factory-direct from Jiangsu, China — export-ready to 30+ countries.
A Manufacturer You Can Rely On
Glorylab (Jiangsu Jiahong Laboratory Equipment Co., Ltd.) is a specialist laboratory equipment manufacturer based near Shanghai, supplying laboratory faucets and water-control solutions to institutions and distributors in more than 30 countries. Every faucet in the Glorylab range is manufactured in-house, allowing us to maintain strict quality standards, offer genuine OEM customization, and provide responsive after-sales support at every stage of your project.
What Are Lab Faucets and Why Do They Matter?
Laboratory faucets are purpose-built water delivery and control fittings designed to meet the specific demands of scientific, medical, and industrial laboratory environments. Unlike standard plumbing fixtures, lab faucets must withstand repeated chemical exposure, high-frequency daily use, precise flow-control requirements, and — in specialist applications — strict material purity standards.
The right faucet selection directly affects laboratory safety, workflow efficiency, and long-term maintenance costs. A fume hood water valve must operate safely without requiring the user to reach inside the enclosure. A distilled water faucet must use a fully metal-free fluid path to prevent ionic contamination. A bench-mounted mixer faucet in a teaching lab must deliver hundreds of thousands of operating cycles without failure.
Glorylab’s 14-model range is designed to address each of these requirements — matching the correct faucet specification to the correct application, every time.
Featured Product Models
1. Cold Water Single-Outlet Faucets
Cold water single-outlet faucets are the standard workhorse of the laboratory bench, providing reliable, controlled delivery of cold mains water at a single point. Glorylab offers two models in this category: a full-size bench faucet for standard laboratory use, and a compact version designed specifically for cup sink installations where space is limited.
2. Multi-Outlet Cold Water Faucets
For laboratory benches that require simultaneous water supply at more than one point — such as shared teaching benches, instrument wash stations, or multi-user research benches — Glorylab offers a range of double- and triple-outlet cold-water faucets. Models are available in brass and 304 stainless steel, with outlet configurations to suit both standard and hose-connected applications.
3. Hot-Cold Mixer Faucets
Where both hot and cold water are available at the bench, a mixer faucet allows the user to blend the supply to the required temperature at the point of use. Glorylab’s hot-cold mixer range covers four distinct configurations — from a standard two-knob mixer for general use, to high-pressure single-lever and low-profile models rated to 35 bar, and a deck-mounted single-outlet mixer for installations requiring a more integrated bench finish.
4. Specialist Faucets
Beyond standard cold water and hot-cold mixer configurations, certain laboratory environments require specialist water control solutions — including touchless sensor taps for hygiene-critical areas, fully metal-free faucets for distilled or deionized water systems, panel-mounted taps for service panels and backboards, and remotely operated water valves for fume hood safety. Glorylab’s specialist faucet range addresses each of these requirements directly, and these models are non-negotiable selections where their specific application conditions apply.
How to Choose the Right Lab Faucet
With 14 models spanning cold water, hot-cold, specialist, and remote-control configurations, selecting the right faucet for your application comes down to four key questions.
Start here. If you need cold mains water only, any model from the cold water single-outlet or multi-outlet range will apply. If your bench has both hot and cold supply, select from the hot-cold mixer range — and confirm your system pressure to determine whether a 10 bar or 35 bar rated model is appropriate. If you are supplying distilled or deionized water, the JH-WL011 is the only correct choice: its fully metal-free PP construction is essential to maintaining water purity and must not be substituted with a brass-body faucet.
A single-user bench position typically requires one outlet. Shared teaching benches, instrument wash stations, and multi-user island benches often benefit from double- or triple-outlet models, which deliver water to multiple points from a single deck penetration and a single supply connection. Consider both the number of simultaneous users and the number of equipment connections at each bench position.
Most Glorylab faucets are designed for standard deck mounting through a bench top surface. If your laboratory uses service panels, backboards, or wall-mounted service columns rather than bench-top fittings, select the JH-WL015 panel-mounted tap. If you are installing water supply into a fume hood, the JH-GF007 remote valve assembly is the appropriate solution — standard bench faucets should not be installed inside a fume hood enclosure.
Consider whether your environment requires touchless operation (select the JH-WL021 sensor tap), a metal-free fluid path for pure water (select the JH-WL011), panel-based distribution (select the JH-WL015), or remote fume hood water control (select the JH-GF007). These requirements are non-negotiable from a safety and contamination-control perspective, and the correct specialist model must be selected before considering other factors.
All five materials support custom dimensions, cutouts, and configurations. If your lab has non-standard bench depths, integrated sink requirements, or specific edge detailing, share your drawings with our engineering team before ordering.
If you are unsure which model best suits your application, Glorylab’s technical team can review your project requirements and provide a written recommendation before you place an order.
Why Choose Glorylab?
14 models covering every laboratory water supply requirement.
From a compact cup sink faucet to a remote fume hood water valve, Glorylab's range eliminates the need to source specialist fittings from multiple suppliers. One manufacturer, one point of contact, one consistent quality standard across your entire fit-out.
Engineered for long-term laboratory use.
Every faucet in the Glorylab range is built with brass bodies, durable epoxy coatings, and ceramic cartridge valve mechanisms rated to 500,000 operating cycles. These are not general-purpose plumbing fittings — they are designed and tested for the demands of daily laboratory use.
360° swivel gooseneck spouts and ergonomic PP handles as standard.
Swivel spouts allow users to direct water flow precisely where it is needed without repositioning equipment. Ergonomic PP handles provide comfortable, accurate flow control across a full working day.
Factory-direct supply with OEM support.
Glorylab manufactures every product in-house at our facility near Shanghai, supplying direct to institutions, distributors, and fit-out contractors across 30+ countries. OEM customization — including branding, outlet configuration, and mounting specification — is available across the range.
Export-ready documentation and compliance.
All Glorylab laboratory faucets are produced and documented to meet international export requirements, with full product specifications, technical drawings, and compliance documentation available on request.
Comprehensive after-sales support.
Glorylab provides dedicated after-sales support, including installation guidance, troubleshooting assistance, and access to replacement parts, ensuring long-term reliability and customer satisfaction.
Model Comparison Table
| Model | Type | Outlets | Water Supply | Mounting | Pressure Rating | Body Material |
|---|---|---|---|---|---|---|
| JH-WL001 | Single-outlet cold water | 1 | Cold | Deck | Standard | Brass + epoxy |
| JH-WL009 | Compact single-outlet | 1 | Cold | Deck (cup sink) | Standard | Brass + epoxy |
| JH-WL006 | Double-outlet cold water | 2 | Cold | Deck | Standard | Brass + epoxy |
| JH-WL010 | Double-outlet hose-ready | 2 | Cold | Deck | Standard | Brass + epoxy |
| JH-WL002 | Triple-outlet cold water | 3 | Cold | Deck | Standard | Brass + epoxy |
| JH-WL008 | Triple-outlet stainless | 3 | Cold | Deck | Standard | 304 Stainless Steel |
| JH-WL012 | Two-knob mixer | 1 | Hot + Cold | Deck | 10 bar | Brass + epoxy |
| JH-WL005 | Single-lever mixer | 1 | Hot + Cold | Deck | 35 bar | Brass + epoxy |
| JH-WL004 | Low-profile mixer | 1 | Hot + Cold | Deck | 35 bar | Brass + epoxy |
| JH-WL018 | Deck-mounted mixer | 1 | Hot + Cold | Deck | 35 bar | Brass + epoxy |
| JH-WL021 | Touchless sensor tap | 1 | Cold | Deck | Standard | Copper |
| JH-WL011 | Distilled/DI water faucet | 1 | Distilled / DI | Deck | 3 bar max | Fully metal-free PP |
| JH-WL015 | Panel-mounted tap | 1 | Cold | Panel | Standard | Brass + epoxy |
| JH-GF007 | Remote fume hood valve | — | Cold (remote) | Remote / Hood | Standard | Copper |
Applications by Industry
Higher Education and Teaching Laboratories
Multi-outlet cold water faucets (JH-WL002, JH-WL006) and two-knob mixer faucets (JH-WL012) are widely used on shared teaching benches in university science departments, providing simultaneous water access for multiple students from a single bench position.
Research and Analytical Laboratories
The JH-WL011 distilled and deionized water faucet is essential in analytical chemistry, pharmaceutical research, and life science laboratories where ionic contamination from metal-body fittings would compromise sample integrity or instrument performance.
Medical and Clinical Laboratories
The JH-WL021 touchless infrared sensor tap supports hands-free operation in medical, microbiological, and pathology laboratory environments, reducing cross-contamination risk at wash stations and preparation areas.
Industrial and Chemical Laboratories
High-pressure-rated hot-cold mixer faucets (JH-WL005, JH-WL018, rated to 35 bar) are suited to industrial testing and quality control laboratories operating from high-pressure water supply infrastructure.
Fume Hood Installations
The JH-GF007 remote water valve assembly is the correct solution for any laboratory where fume hood safety protocols require external water supply control, including chemistry, hazardous materials handling, and pharmaceutical synthesis environments.
Our Certifications
We hold international authoritative certifications to ensure our equipment meets global market access standards and production quality requirements.
The plant is equipped with CNC machining centers, a 300-meter automated coating and finishing line, and in-house QC systems covering incoming materials, in-process inspection, and final functional testing. Products are exported to buyers in more than 30 countries and manufactured in compliance with internationally recognized standards including SEFA 8M-2016, EN 14175-3, and ASHRAE 110-2016. Glorylab's engineering team provides direct technical support for product selection, specification review, and custom configuration throughout the procurement process.
Customization & Comprehensive After-Sales Support
One-to-One Customization Service
1. Outlet configuration: Glorylab can adjust outlet quantity, spacing, and direction to fit your lab bench layout and user positions.
2. Mounting and installation: We can modify mounting threads, base dimensions, and hardware to match non-standard bench sizes or installation requirements.
3. Water supply coordination: For projects using multiple water types such as cold, hot-cold, or distilled/DI water, Glorylab can coordinate faucet selection as part of a complete lab fit-out package, including sinks, benches, and casework.
Global After-Sales Support
1. Dedicated project support: Each export project has a dedicated contact to assist with product selection, documentation, lead times, and logistics.
2. Replacement parts: Key spare parts for current faucet models are kept in stock to support long-term maintenance.
3. Technical documentation: Technical data sheets, installation drawings, certificates, and compliance documents are available on request.
Related Product
Lab Benches & Workstations
Anti-Vibration Tables
Lab Casework & Cabinets
Lab Storage Cabinets
Lab Countertops & Worktops
Lab Sinks & Pegboards
Lab Gas Taps & Valves
Lab Chairs & Stools
FAQs
Q1. What is the difference between the JH-WL005, JH-WL004, and JH-WL018 hot-cold mixer faucets?
All three models are rated to 35 bar and use ceramic cartridge mixer valves. The JH-WL005 is a standard riser-mounted single-lever mixer with a full-height gooseneck spout. The JH-WL004 is a low-profile version with a reduced body and spout height, suited to installations where bench clearance above the deck is limited. The JH-WL018 is a deck-mounted model with a lower-profile body that sits closer to the bench surface, preferred where a more integrated or recessed appearance is required.
Q2. Can the JH-WL011 distilled water faucet be used on standard cold mains water?
The JH-WL011 can physically convey cold mains water, but it is designed and rated for a maximum working pressure of 3 bar. Standard laboratory mains water pressure frequently exceeds this. Using the JH-WL011 on a standard mains supply without a pressure-reducing valve is not recommended. For standard cold water supply, select any of the brass-body cold water faucet models in the range.
Q3. What power supply options are available for the JH-WL021 sensor tap?
The JH-WL021 supports both AC mains power connection and DC battery supply. The appropriate power method will depend on whether a power outlet is accessible at the bench position. Both configurations are available and should be specified at the time of order.
Q4. How is the JH-GF007 fume hood water valve installed?
The JH-GF007 is a remote control component and is not a standalone faucet. It is installed as part of a complete fume hood water supply assembly that includes a matched water cock and a slow-opening safety needle valve. The control component is mounted externally on the fume hood enclosure or adjacent wall, allowing the user to open and close the water supply without reaching inside the hood. Full installation guidance and matched component specifications are provided with each order.
Q5. Are replacement cartridges and spare parts available after purchase?
Yes. Glorylab maintains replacement ceramic cartridges, handle components, and sealing elements for all current faucet models. Spare parts can be ordered directly from Glorylab or through your regional distributor. All current models use standardized cartridge formats to simplify maintenance and stocking.
Q6. Can Glorylab supply laboratory faucets alongside sinks, benches, and casework as part of a complete fit-out?
Yes. Glorylab manufactures laboratory sinks, pegboards, and laboratory furniture in addition to faucets and water valves. For full laboratory fit-out projects, our team can coordinate the specification and supply of faucets alongside compatible sink models, bench tops, and casework from a single factory-direct source. Contact our project team to discuss your requirements.